Welcome to Cheerico Cupcake Tower In Australia

10 Tier Maypole Acrylic Round Cupcake Tower

Be the first to review this product

Availability: In stock

$239.00

OR

Quick Overview

Our best selling 10 tier cupcake stand with it's simple but sturdy screw on design. Can be used as 10,9,8,7,6,5, 4,3,2 tier stand, ideal for Weddings and parties.Overall size:    Length 600 * Width 600 * Height 934mm

10 Tier Maypole Acrylic Round Cupcake Tower

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

10 Tier Maypole Cupcake Tower by Cheerico

10 Tier Maypole Cupcake Tower is our biggest Cupcake Tower. This cupcake tower is held together by a rod in the middle and fixed with screws for strength and stability. It is very sturdy and bakeries love them! You can always use this tower as smaller cupcake tower. Any plate is removable when it is not being used. And all plate can be used as bottom tier. Thus, this cupcake tower gives you flexibilities for all special events.

This 10 tier Maypole cupcake Tower can cater at least 280 cupcakes.

Overall size:   

Length 500 * Width 500 * Height 932mm             
Tier 1: Dia 150mm      
Tier 2: Dia 200mm        
Tier 3: Dia 250mm        
Tier 4: Dia 300mm      
Tier 5: Dia 350mm              
Tier 6: Dia 400mm      
Tier 7: Dia 450mm  
Tier 8: Dia 500mm
Tier 9: Dia 550mm  
Tier 10: Dia 600mm  

#Rod Pillar Size : Diameter 60mm x 100mm Height 
# 1st,2nd,3rd,4th,5th,6th,7th, 8th, 9th, 10th  tier is 5mm thick 

Packaging:
Flat packed in cardboard carton, each component is protected with bubble wrap.

Contents:
Tier plates x 10
Rod pillars x 9
Screws x  10

Assembly Instructions: very simple and quick to assemble. Simply fasten each screw to the corresponding rod, there is no need for glue or other fixings/hardware. View this instructional video on how to put the Maypole Cupcake Tower together.;The four small round plastic feet are included, and you can mix the plates as any plate can be used as top or bottom tier.

Can be taken apart, washed and stored away for another time. This cupcake Tower can be used as a 10 tier Tower or you can remove the top plates and use it as a 9 tier, 8 tier, 7 tier, 6 tier, 5 tier, 4 tier etc.

Below you will find an example of how many cupcakes can be arranged on each tier.

 

PLEASE NOTE: You must remove the manufacturers’ protective cover before assembling this product. This covering is clear bubble and cling wrap on both sides of every acrylic component.

Download Assembly instructions for Round Maypole cupcake Tower

ASSEMBLY GUIDE:

Parts: Acrylic discs, head screws, double screws, acrylic rods and acrylic feet.

* Remove the manufacturer’s protective cover from BOTH side of each acrylic component.
* Begin by placing the feet to the underside of the bottom disc ensuring they are evenly spaced.
* Take a metal head screw and place it on to a flat surface where the Tower is to be constructed
* Carefully line up the hole(s) of the largest disk with head screw ensuring the disc is resting securely on the acrylic feet.
* Now screw the first rod onto the screw thread of the head screw making sure the acrylic disc is clamped firmly between two components.
* Continue by placing the next largest disc on to the screw thread of rod and tighten each piece as you go.
* The final rod is to be used as the supposed for the top tier and the Tower is completed by adding the other screw cap into the top.

CARE GUIDE:

* The Tower is made from acrylic which will scratch if it is not looked after properly. 
* To clean the product use warm water with a little washing-up liquid and soft cloth. 
* Do not use any abrasive cleaning products as they will make the acrylic. 
* Do not put this Tower in a dishwater

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.