7 Tier Mirrored Maypole Cupcake Tower

7 Tier Mirrored Maypole Cupcake Tower by Cheerico Bakery Supplies

This is an elegant cupcake tower that you use it as smaller tier for birthday or bigger tower for wedding. Any tier is removable when it is not used.

The entire size: Length 450 * Width 450 * Height 622mm

Tier1:150mm
Tier2:200mm
Tier3:250mm
Tier4:300mm
Tier5:350mm
Tier6:400mm
Tier7:450mm

# 1st,2nd,3rd,4th,5th,6th tier is 4mm thick, 7th tier is 5mm thick and 100mm apart. The total height of the Tower is 622mm. 
# The acrylic comes wrapped in the manufactures protective covering and the bottom of the Tier is in WHITE colour for the mirror effects.

There is no need for glue or other fixings.
The edges of the acrylic are perfectly clear and polished.
Every part of the Tower has been accurately cut and finished
Can be taken apart, washed and stored away for another time.
The Tower comes flat packed and only takes a few minutes to assemble.
Below you will find the diagrams as an example of how to arrange the cupcakes on each cupcake Tower tier.

Download Assembly instructions for Round Maypole cupcake Tower

ASSEMBLY GUIDE:

Parts: Acrylic discs, head screws, double screws, acrylic rods and acrylic feet.

* Remove the manufacturer’s protective cover from BOTH side of each acrylic component.
* Begin by placing the feet to the underside of the bottom disc ensuring they are evenly spaced.
* Take a metal head screw and place it on to a flat surface where the Tower is to be constructed
* Carefully line up the hole(s) of the largest disk with head screw ensuring the disc is resting securely on the acrylic feet.
* Now screw the first rod onto the screw thread of the head screw making sure the acrylic disc is clamped firmly between two components.
* Continue by placing the next largest disc on to the screw thread of rod and tighten each piece as you go.
* The final rod is to be used as the supposed for the top tier and the Tower is completed by adding the other screw cap into the top.

CARE GUIDE:

* The Tower is made from acrylic which will scratch if it is not looked after properly. 
* To clean the product use warm water with a little washing-up liquid and soft cloth. 
* Do not use any abrasive cleaning products as they will make the acrylic. 
* Do not put the Tower in a dishwater